1. What Does 0.1 Second Mean?
0.1 second is the fastest single measurement cycle of MCZX Qiuhao R300, representing outstanding performance as follows:
Equals 0.3 times of human eye blink (300ms)
Equals 0.001 times of high-speed camera exposure (1ms)
30 times faster than scanning optical profilometer (3s)
The 0.1-second measurement sets a milestone for industrial inspection, specially customized for mass production scenarios.
2. Scanning Type vs. Reflection Laser Interferometry
Scanning Devices (Zygo/Sensofar/Bruker)
Principle: Point-by-point scanning via white light interferometry to reconstruct 3D topography
Measurement speed: 5–10 seconds per piece
Application: R&D sampling inspection, laboratory research-grade testing
Non-scanning Device (MCZX Qiuhao R300)
Principle: Laser interferometry, full-field imaging in single exposure
Measurement speed: 1 second per single imaging
Application: Mass production full inspection, inline industrial inspection
3. Why 1-second Cycle Is Critical for Mass Production
Practical Application: 6-inch & 8-inch silicon lenses tested alternately, daily volume up to tens of thousands
| Equipment | Single Piece Cycle Time | Total Time for 50,000 Pieces | Feasibility |
|---|
| MCZX Qiuhao R300 | 1 s | ~1.3 hours | Fully feasible |
| Sensofar | 3 s | ~2.6 hours | Only sampling available |
| Zygo | 5 s | ~6.5 hours | Only sampling available |
| Bruker | 30 s | ~13 hours | Unrealistic for large inspection volume |
With 1s vs 3s single-cycle difference, the efficiency gap expands massively in mass production, bringing huge disparity in manufacturing costs.
4. Applicable Scenarios for 1s High-speed Imaging
Suitable Scenarios
Full inspection for mass-produced silicon lenses (daily throughput 80,000 pcs, alternate testing of 6-inch & 8-inch lenses)
Batch sampling inspection of silicon wafers (daily throughput 50,000 pcs)
Factory outgoing inspection for optical flat mirrors (daily throughput 40,000 pcs)
Unsuitable Scenarios
Research-level ultra-high precision requirement (<0.5μm): scanning type imported devices are recommended
Diverse sample types (curved surfaces, rough surfaces): multi-mode inspection equipment is recommended
5. Equipment Selection Decision Tree
Step 1: Daily inspection throughput
Step 2: Precision requirement
6. Conclusion
1-second high-speed imaging serves as the optimal solution for mass production scenarios:
Daily throughput >10,000 pcs: adopt MCZX Qiuhao R300 to finish inspection efficiently
Daily throughput <10,000 pcs: scanning devices including imported alternatives are viable
Proper equipment selection doubles inspection efficiency and boosts production capacity remarkably. MCZX focuses on industrial visual inspection. Official website: http://bevs.me
- Share
-
12
- Surface Profile Inspection for Optical Communication Silicon Lenses: Domestic vs. Imported 3D Measuring Instruments – A Comprehensive Comparison
- 正在更新中...
获取最新动态