After Silicon Lens Wafer Process Scaling: How Can Optical Communication Device Makers Achieve Large‑Scale Stable Delivery?

After Silicon Lens Wafer Process Scaling: How Can Optical Communication Device Makers Achieve Large‑Scale Stable Delivery?

Introduction: Delivery Rhythm Stuck at Back‑End InspectionA silicon photonic module team recently advanced an 800G project. The yield of silicon lenses fabricated through wafer processing was good, but the delivery rhythm on the module fac···
Hotspot 2026-10-27 56 12
Microlens Procurement Pitfalls: Ask Suppliers These 5 Questions First

Microlens Procurement Pitfalls: Ask Suppliers These 5 Questions First

When procuring microlenses, how can you assess a supplier's quality control capability? By asking these5 questions, you can quickly evaluate the supplier's inspection capabilities and quality system.Question 1: What Is Your Inspecti···
Technology 2026-07-30 105 12
Silicon Wafer Microlens Arrays: Three Major Challenges and Solutions for Automated Full Inspection

Silicon Wafer Microlens Arrays: Three Major Challenges and Solutions for Automated Full Inspection

Automated full inspection of silicon wafer microlens arrays faces three major technical challenges in practical implementation:positioning recognition, batch efficiency, and data management.This article breaks down each challenge based on r···
Technology 2026-07-20 126 12
Why Are Silicon Photonics Wafers Suddenly So Popular? How Have Inspection Requirements Changed?

Why Are Silicon Photonics Wafers Suddenly So Popular? How Have Inspection Requirements Changed?

Silicon photonics technology is the core driving force behind the optical communication revolution. How do the inspection requirements for silicon photonics wafers differ from those of ordinary silicon lenses? This article analyses the insp···
Technology 2026-07-15 143 12
Why Is Microlens Quality Unstable? Sub‑Nanometre Inspection Reveals the Truth

Why Is Microlens Quality Unstable? Sub‑Nanometre Inspection Reveals the Truth

Microlens quality fluctuates significantly, and yields remain unstable – is the problem in the manufacturing process or in the inspection? Sub‑nanometre inspection reveals many overlooked quality truths.I. Common Causes of Quality Fluctua···
Technology 2026-07-14 104 12
Silicon Lens Inspection Equipment Selection Guide: In-depth Analysis of 0.1s Fastest Measurement Solution

Silicon Lens Inspection Equipment Selection Guide: In-depth Analysis of 0.1s Fastest Measurement Solution

1. What Does 0.1 Second Mean?0.1 second is the fastest single measurement cycle of MCZX Qiuhao R300, representing outstanding performance as follows:Equals 0.3 times of human eye blink (300ms)Equals 0.001 times of high-speed camera exposure···
Technology 2026-06-11 117 12
<1>
Top