Affiliation: Shenzhen Qianhai Yuzhuo (Apex) — Authorized Distributor of PILLAR Corporation
Meta description: PILLAR (Japan) ultra-high-purity PFA fluid systems: PILAFLON PFA tubing (-196 to +260 °C, inner-wall Ra 0.03 µm), Super 300 P-series fittings, PS/PE low-pulsation bellows pumps, PA automatic pulsation dampeners and shutoff/check/flow-control/vent valves. All-wetted PFA/PTFE with no metal-ion elution, for semiconductor cleaning, coating/developing, CMP and medical dialysis chemical delivery. Authorized distributor: Shenzhen Qianhai Yuzhuo (Apex).
Models: PILAFLON ultra-clean PFA tubing; Super 300 P-series fittings; PS-10/20/40MA bellows pumps; PE-5~80MA(N) bellows pumps; PA-10~100HB pulsation dampeners; PSV shutoff valve; PGB check valve; PCAP flow-control valve; PAV vent valve
![]() | ![]() | ![]() |
| Pressure pulse regulator | Flow control valve | Super 300 series connectors |
![]() | ![]() | ![]() |
| Complementary tools | Ultra-clean PFA tube | Bladder pump |
![]() | ![]() | ![]() |
| Stop valve | Check valve | Exhaust valve |
PILLAR semiconductor chemical-delivery station — PFA tubing, bellows pumps and valve manifold

Core Value
PILLAR ultra-high-purity PFA tubing, bellows pumps and valves — a century-old fluororesin leader delivering the full chain of semiconductor-grade clean chemical delivery.
· Century-old market share leader: PILLAR holds a world-leading share in piping and fittings for semiconductor cleaning and coating/developing equipment; NAURA, Hwatsing, ACM Research and others are its customers.
· No metal-ion elution: all wetted parts use virgin PFA/PTFE resin (raw material from Daikin, Japan and DuPont, USA), eliminating secondary chemical contamination.
· Ultra-smooth inner wall: ultra-clean PFA tubing inner wall Ra as low as 0.03 µm, far better than conventional products, with no particle residence in the flow path.
· Low-pulsation stabilized delivery: PS/PE bellows pump + PA automatic pulsation dampener control pulsation within ±12.5% of discharge pressure, with no on-site adjustment.
· Full-range fittings and valves: Super 300 fittings cover union/elbow/tee/reducing/panel-mount/space-saver/flange styles, paired with four families of PFA valves.
· Wide temperature and pressure range: PFA tubing -196 to +260 °C; Super 300 fittings 200 °C / 0.7 MPa, covering most aggressive high-purity chemical service.
Product Description
Ultra-high-purity PFA piping is the "blood vessel" of semiconductor chemical supply. Drawing on a century of fluororesin sealing and fluid-control heritage, PILLAR (Japan) delivers a complete fluid system from PFA tubing and Super 300 fittings to bellows pumps, pulsation dampeners and PFA valves. The closed loop of "pump + valve + tubing + fitting + dampener" forms a high-purity centralized chemical-delivery solution for semiconductor, LCD and medical applications.
1. Operating Principle and Technical Breakthrough
· Ultra-clean PFA tubing (PILAFLON®): produced in clean rooms from virgin PFA resin with a highly smooth inner wall. By reducing inner-wall roughness, particle and chemical residence are minimized for high-purity clean delivery.
· Super 300 P-series fittings: a dedicated tool presses the PFA sleeve into the tube ID; after inserting the fitting body, tighten the nut until the torque ring clicks for a reliable seal. The body is available in PTFE or PFA; valve bodies and fittings are injection-molded as one-piece smooth PFA.
· Bellows pump + pulsation dampener: compressed air drives a reciprocating PTFE bellows to suck and discharge chemical. The PA dampener is fully automatic: chamber pressure follows pump-pressure fluctuation and compensates for filter clogging and valve-actuation pressure swings, flattening discharge pulsation.
2. Performance and Precision Parameters
· PFA tubing: operating temperature -196 °C to +260 °C; ultra-clean tube inner wall Ra 0.03 µm / Rmax 0.58 µm (conventional A: Ra 0.18 / Rmax 1.74; conventional B: Ra 0.25 / Rmax 3.19).
· Super 300 fittings: max temperature 200 °C, max pressure 0.7 MPa, for liquid service, compatible with PFA/PTFE tubing.
· PS bellows pumps: PS-10/20/40MA, max discharge 12/24/48 L/min, pulsation rate ≤±12.5%, volume only 2/3 of general pumps.
· PE bellows pumps: PE-5~80MA(N), max discharge 8~82 L/min, proprietary durable PTFE bellows.
· PA pulsation dampeners: PA-10/20/40/80/100, operating temperature 10–180 °C, line pressure 0–0.45 MPa.
Super 300 PILLAR P-series fittings — full-shape PFA/PTFE tubing fitting selection catalog
3. Materials and Product Applicability
· PFA tubing sizes: metric tubing 3×2 to 25×22; inch tubing 1/8" to 1-1/2".
· Fitting shapes: female/male connector union, elbow, tee, reducer, panel-mount, 45° elbow, space-saver, flange, cap — full range; with arc bends, flared fittings, flexible-tube connectors and male connectors.
· Valve families: PSV shutoff valve (manual 0.7 MPaG / 100 °C), PGB check valve (cracking 0.01 MPaG, perfluorinated O-ring 150 °C), PCAP flow-control valve (Cv 0.026), PAV vent valve (0.3 MPaG / 80 °C).
· Applicable fluids: chemicals and ultrapure water; aggressive high-purity chemicals, CMP slurry (PC-series pumps also available).
PE-series bellows pump operating principle — twin bellows alternating suction and discharge
4. Core Value and Application Benefits
· No secondary contamination: no metal-ion elution plus ultra-smooth inner wall protects high-purity chemical purity.
· Low pulsation improves yield: pump + dampener hold pulsation within ±12.5%, supporting precision coating and developing.
· One-piece injection molding, easy maintenance: valve bodies and fittings are one-piece smooth PFA with no particle traps; PA thick-wall R-bellows are reliable with long maintenance intervals.
· System integration: closed-loop delivery filter → pump → pulsation dampener → process bath, with solenoid valves and controllers for fully automatic pressure stabilization.
PFA tubing and elbow fittings installed on glass-processing equipment
Key Advantages
(1) High-Purity Clean Piping: No Metal-Ion Elution + Ultra-Smooth Inner Wall
PFA tubing operates across a wide -196 to +260 °C range with no elution of metal ions or other impurities; ultra-clean inner-wall Ra as low as 0.03 µm, paired with Super 300 one-piece injection-molded PFA valve bodies/fittings, gives a smooth flow path with no particle residence.
(2) Low-Pulsation Delivery: PS/PE Pumps + PA Dampener, Automatic Stabilization, No On-Site Adjustment
· The PS series holds pulsation rate within ±12.5%; the PA dampener automatically follows pump-pressure fluctuation and compensates for filter clogging and valve-actuation swings.
· When pump discharge pressure >0.16 MPa (PA-100H >0.2 MPa), pulsation is within ±12.5% of discharge pressure; below that threshold it is within 0.04 MPa.
· Measured (PA-20HB + PE-20MA, pure water 25 °C, air pressure 0.5 MPa): the discharge-pressure curve is significantly flattened after adding the dampener.
(3) Full-Range PFA Valves: From Shutoff to Vent, All in One Place
· PSV shutoff valve: manual, 0.7 MPaG / 100 °C, one-piece injection-molded PFA body, for high-purity aggressive chemical processing.
· PGB check valve: cracking pressure only 0.01 MPaG for smooth liquid flow; perfluorinated O-ring rated to 150 °C.
· PCAP flow-control valve: Cv 0.026, compact and light; PAV vent valve: for line venting.
(4) Distribution and Service Advantages
Qianhai Yuzhuo is an authorized PILLAR distributor: stocked parts, payment-on-delivery, localized selection support. Standard lead time is about 2–3 months; special configurations such as explosion-proof-sensor bellows pumps and CMP PC-series pumps are available.
Technical Specifications
Item | Parameter |
Ultra-clean PFA tubing (PILAFLON) | |
Operating temperature range | -196 °C to +260 °C |
Inner-wall roughness (ultra-clean tube) | Ra 0.03 µm / Rmax 0.58 µm |
Applicable sizes | Metric 3×2 to 25×22; inch 1/8" to 1-1/2" |
Specific gravity | 2.15 |
Features | Heat and chemical resistant, non-stick, excellent electrical properties, no metal-ion elution |
Super 300 P-series fittings | |
Max operating temperature | 200 °C |
Max operating pressure | 0.7 MPa (liquid service) |
Compatible tubing | PFA, PTFE |
Body material | PTFE (A) / PFA (B); sleeve/nut PFA |
Low-pulsation bellows pump PS series | |
Models | PS-10MA / PS-20MA / PS-40MA |
Max discharge | 12 / 24 / 48 L/min |
Supply air pressure | 0.2–0.5 MPaG |
Max discharge pressure | 0.35–0.45 MPaG |
Operating temperature | 10–40 °C |
Pulsation rate | ≤±12.5% |
Weight | 10 / 20 / 40 kg |
SPELA bellows pump PE series | |
Models | PE-5MA(N) / 10MA(N) / 20MA(N) / 40MA(N) / 80MA(N) |
Max discharge | 8 / 16 / 32 / 60 / 82 L/min |
Supply air pressure | 0.2–0.5 MPaG |
Max discharge pressure | 0.3–0.45 MPaG |
Operating temperature | 10–40 °C |
Weight | 5 / 8 / 15 / 29 / 47 kg |
Pulsation dampener PA series | |
Models | PA-10HB / 20HB / 40HB / 80MB / 100H |
Operating temperature | 10–180 °C (PA-100H: 10–80 °C) |
Line pressure | 0–0.45 MPa (PA-100H: 0–0.65 MPa) |
Supply air pressure | 0.2–0.7 MPa (PA-100H: 0.2–0.5 MPa) |
Pulsation control | ±12.5% of discharge pressure when >0.16 MPa; within 0.04 MPa when <0.16 MPa |
Weight | 3.5 / 8 / 9.5 / 13.5 / 22 kg |
Valves | |
PSV shutoff valve | Manual, 0.7 MPaG, 100 °C, SUPER 300 fitting, wetted PFA/PTFE |
PGB check valve | 0.7 MPaG, cracking pressure 0.01 MPaG, sealing 0.05 MPaG; perfluoro O-ring 150 °C / EPDM 100 °C |
PCAP flow-control valve | Manual, 0.7 MPaG, 100 °C, Cv 0.026 |
PAV vent valve | Manual, 0.3 MPaG, 80 °C |
Note: the above is compiled from PILLAR catalog data; detailed model dimensions are in the corresponding selection catalog.
Applications
Semiconductor Fabs
· High-purity chemical PFA piping and fitting systems for cleaning and coating/developing equipment.
· Developer/clean chemical recirculation delivery stations; CMP slurry delivery (PC-series pumps).
· Integration of delivery-station bellows pumps, pulsation dampeners and valve manifolds.
LCD / OLED Panels
· High-purity chemical supply piping in panel processes.
· Low-pulsation stable delivery of developer and etch chemicals.
Photovoltaics and Precision Manufacturing
· Chemical supply in photovoltaic cell / wafer processes.
· Liquid supply for precision electronics and pharmaceutical manufacturing.
Medical (Hemodialysis Centralized Delivery)
· Using PFA's no-metal-ion-elution, chemical-resistant and clean properties for dialysis-center centralized delivery piping.
FAQ
Q: Why are PILLAR PFA systems suited to semiconductor high-purity chemicals?
A: Wetted parts use virgin PFA/PTFE resin (raw material from Daikin, Japan and DuPont, USA) with no metal-ion elution; ultra-clean tubing inner-wall Ra is as low as 0.03 µm; operating temperature ranges -196 to +260 °C; the material is heat-resistant, chemical-resistant and non-stick, resisting most chemical attack.
Q: How do PS/PE bellows pumps and the PA dampener work together for low-pulsation delivery?
A: The PS series pump itself controls pulsation rate within ±12.5%; the PA dampener is fully automatic with no on-site adjustment — chamber pressure automatically follows pump fluctuation and compensates for filter clogging and valve-actuation swings. In series they significantly flatten the discharge-pressure curve.
Q: What are the key points for installing Super 300 fittings?
A: First thread the nut onto the tube, use the dedicated PILLAR tool to press the PFA sleeve into the tube ID, then insert the fitting body and tighten the nut until the torque ring clicks. Small-bore models (Ø3/Ø4) without a click ring require PILLAR feeler gauge SSG to manage nut-to-body clearance.
Q: Why is the PGB check valve cracking pressure so low? What is the benefit?
A: PGB cracking pressure is only 0.01 MPaG (sealing 0.05 MPaG); low cracking ensures smooth liquid flow and avoids unnecessary pressure loss. O-rings are available in perfluoroelastomer (150 °C) or EPDM (100 °C) to suit different chemicals and temperatures.
Q: Can Qianhai Yuzhuo supply complete delivery stations, not just components?
A: Yes. As an authorized distributor we provide the full loop — PILAFLON tubing, Super 300 fittings, PS/PE bellows pumps, PA dampeners and PSV/PGB/PCAP/PAV valves — with stocked parts, payment-on-delivery, localized selection support, and special options such as explosion-proof-sensor pumps and CMP PC-series pumps.
Shenzhen Qianhai Yuzhuo (Apex) — Authorized Distributor of PILLAR Corporation
WeChat: qhyz1303 / Tel: +86-755-26609876 / Email: qhyz@apexe.net / Web: http://www.apexe.net/