Affiliation: Shenzhen Qianhai Yuzhuo (Apex) — Anti-static Coating Agents (MCZX product line)
Meta description: Water-based anti-static coating agents distributed by Shenzhen Qianhai Yuzhuo, with five models A28-12, N6, H16, A28 and H19 third-party tested on five substrates — TAC polarizer, polarizer protective film, plastic surfaces, optical-film / protective-film primer, and glass. Surface resistivity covers 10³~10¹⁰ Ω/sq, visible light transmittance 87.8%~92.7%, alcohol / dry-wipe resistant; formulations and coating processes can be customized by substrate, target resistivity, transmittance and drying conditions.
Models: A28-12, N6, H16, A28, H19


Layer structure of an anti-static-coated TAC polarizer — the A28-12 coating sits between the TAC film and the pressure-sensitive adhesive, with product technical data (report A28-12)
Core Value
Coatable anti-static coating agent series — one formulation per substrate, a full-chain custom ESD solution from TAC polarizer to glass cover.
· Eco-friendly water-based: water as solvent, no organic solvents, store at 15~35°C, meeting clean-production environmental requirements.
· Adjustable resistivity: through dilution ratio and coating weight, surface resistivity can be tuned on demand across 10³~10¹⁰ Ω/sq.
· High transparency: after film formation, visible light transmittance is 87.8%~92.7%, without affecting light transmission of optical films and display panels.
· Five-substrate validation: TAC polarizer, polarizer protective film, plastic surfaces, optical-film / protective-film primer, and glass all have third-party test reports.
· Wipe-resistant: N6, A28 and H19 keep stable resistivity after 50 alcohol wipes and 50 dry wipes.
· Customizable: formulations and coating processes tailored by substrate, target surface resistivity, transmittance and drying / curing conditions.
Product Description
The anti-static coating agent series is a set of coatable, water-based anti-static coating solutions distributed by Shenzhen Qianhai Yuzhuo. Using water-based resin, conductive polymer (polythiophene) or nano inorganic conductive particles as the conductive functional component, it forms an ultra-thin transparent conductive film on TAC film, PET protective film, plastic parts, optical films and glass by coating (wiping / spraying / roll / wire-bar), lowering the substrate surface resistivity from insulating level (bare glass approx. 10¹⁰~10¹¹ Ω) to 10³~10¹⁰ Ω/sq. This quickly dissipates static charge accumulated on the surface, avoiding electrostatic attraction of dust and fibers, and eliminating ESD damage to display panels, optical films and precision electronic parts.
The series has five models, each third-party tested and validated on five typical substrates:
Model | Substrate | Test Report No. | Conductive System |
A28-12 | TAC polarizer / TAC optical compensation-film primer | A28-12 | Water-based resin + conductive polymer |
N6 | Polarizer protective film / release-film top coat | 5_N6 | Nano inorganic conductive particles |
H16 | Various plastic surfaces (except PP, PE) | 5_H16 | Water-based resin + transparent conductive liquid |
A28 | Optical film / protective-film primer (high dilution) | 4_A28 | Polythiophene conductive polymer |
H19 | Glass / display / touch-panel cover | 4_H19 | Pure silicone resin |
1. Working Principle
Ordinary plastic films, optical films and glass have extremely high surface resistivity (bare glass approx. 10¹⁰~10¹¹ Ω). Static charge generated by friction during production, winding and lamination cannot dissipate, attracting dust and fibers and possibly causing ESD damage to devices. After the anti-static coating is applied and forms a film, the conductive polymer or nano conductive particles build a continuous conductive path on the surface, lowering surface resistivity to 10³~10¹⁰ Ω/sq so static charge dissipates slowly and evenly — achieving "anti-static, dust-proof, foreign-matter-proof" while preserving the substrate's optical transmittance.
2. Surface Resistivity and Key Performance Data (per third-party test reports)
The following data are taken from the corresponding model's third-party test report, under the same test conditions as the original:
· A28-12 (TAC polarizer, report A28-12): surface resistivity neat 1×10³ Ω/sq, 1:1 diluted 1×10⁴ Ω/sq; visible light transmittance neat 89.5%, 1:1 diluted 90.5% (substrate TAC optical compensation film R0=270, Rth=182, base-film transmittance 90.4%); coating thickness 15 μm (approx. 15 g/㎡), dry at 80°C for 10 minutes; after PSA coating, the adhesive surface still maintains 10⁶~10⁸ Ω/sq.
· N6 (polarizer protective film, report 5_N6): surface resistivity neat 1×10⁸, 1:2 diluted 1×10⁹, 1:6 diluted 1×10¹⁰; resistivity essentially unchanged after 50 alcohol wipes and 50 dry wipes; visible light transmittance 87.8% (neat) ~ 88.9% (diluted); coated on 60 μm PET film, cured at 120°C for 20 seconds.
· H16 (various plastic surfaces, report 5_H16): surface resistivity neat 1×10⁸, 1:7 diluted 1×10⁹; visible light transmittance 88.7%~89.8% (bare PET 87.5%); substrate 70 μm PET, coating 6 μm (approx. 6 g/㎡), dry at 120°C for 30 seconds; suitable for PET, PMMA, PC, PVC etc. (except PP, PE).
· A28 (film / protective-film primer, report 4_A28): wet film 6 μm neat coating reaches 10⁴; after high-ratio dilution and film formation, surface resistivity stably holds at 10⁶ in open environment for three days; under 1:6 / 1:8 / 1:10 dilution, resistivity rises gradually day by day (day 1–4) from 10⁵~10⁶ to 10⁹; after 50 alcohol / dry wipes, the 1:6 dilution stays at 10⁶; coated on 60 μm PET film, cured at 120°C for 20 seconds.
· H19 (glass, report 4_H19): initial resistivity 1×10⁷, after 50 alcohol wipes 1×10⁸, after 50 dry wipes 1×10⁸, still 1×10⁸ after another 50 alcohol wipes; visible light transmittance 92.4%~92.7% (bare glass 91.5%); bare glass resistivity 10¹⁰~10¹¹, and above 10¹³ after alcohol wiping.
Note: The above data were verified in each manufacturer's laboratory and do not constitute a product quality guarantee; customers must verify in actual use. Surface resistance varies with humidity — it rises when humidity drops.
3. Materials and Product Applicability
· TAC film / TAC optical compensation film: A28-12 can be coated directly on TAC film without alkali washing, adheres well to TAC after drying, and provides good adhesion for the PSA; suited to In-cell / On-cell IPS display polarizers.
· Protective film / release film: N6 (top coat, permanent, alcohol- and dry-wipe resistant), A28 (primer, high dilution, long-term stable resistivity).
· Plastic parts (except PP, PE): H16 suits roll-to-roll transparent PET film and PMMA, PC, PVC substrates; the film is fine, non-greasy and non-tacky.
· Glass / touch-panel cover: H19 is designed for glass; heat-cure (80°C × 3 min) or air-dry at room temperature (5 days); after curing the film surface is hard, scratch-resistant and alcohol-wipe resistant.
4. Core Value and Application Benefits
· Yield improvement: eliminates static-attracted dust / foreign matter during polarizer lamination, optical-film rewinding and glass-cover production, reducing bright spots and foreign-matter defects on display panels.
· Process-friendly: water-based and eco-friendly; the thinner is pure water : isopropanol = 1:1 (H19 glass grade diluted with pure water); filter through a 200-mesh screen before use.
· Long-term resistivity stability: the A28 primer, after high-ratio dilution, keeps stable resistivity in open environment for three days, leaving ample working time for subsequent adhesive coating and rewinding.
· Complete packaging: samples in 100 g HDPE bottles; shipments in 1 kg / 10 kg / 25 kg HDPE drums (N6 in 20 kg, A28 in 25 kg HDPE).
Key Advantages
(1) One formulation per substrate, backed by five third-party reports
Unlike a generic anti-static agent "for everything", this series matches the conductive system precisely to the substrate: water-based conductive-polymer primer for TAC polarizer (A28-12), nano inorganic particle top coat for protective film (N6), colorless transparent water-based coating for plastic surfaces (H16), polythiophene for film / protective-film primer (A28), and pure silicone resin for glass (H19) — each substrate has a corresponding third-party test report number.
Measured data of the highly stable anti-decay anti-static coating N6 — neat to 1:6 dilution surface resistivity 10⁸~10¹⁰, stable after 50 alcohol / dry wipes, transmittance 87.8%~88.9% (report 5_N6)
(2) Wide adjustable surface-resistivity range, from conductive to anti-static
Model | Neat Resistivity | Diluted Resistivity | Positioning |
A28-12 | 1×10³ | 1×10⁴ (1:1) | Highly conductive TAC primer |
A28 | 1×10⁴ (6 μm wet film) | 1×10⁶~10⁹ (1:6~1:10) | Film / protective-film primer, long-term stable |
H16 | 1×10⁸ | 1×10⁹ (1:7) | Transparent plastic anti-static |
N6 | 1×10⁸ | 1×10¹⁰ (1:6) | Protective-film top coat, wipe-resistant |
H19 | 1×10⁷ | 1×10⁸ (after wipes) | Glass-cover anti-static |
(3) High transparency plus wipe resistance for optical and clean production
Visible light transmittance of all models exceeds the bare substrate (H19 reaches 92.4%~92.7%, H16 approx. 88.7%~89.8%, N6 approx. 87.8%~88.9%); N6, A28 and H19 keep stable resistivity after 50 alcohol wipes and 50 dry wipes, suiting display-panel and glass-cover lines that require repeated cleaning.
Day-by-day measured resistivity of the high-dilution anti-static coating A28 — still stable on day 4 under 1:6 / 1:8 / 1:10 dilution, maintained after 50 alcohol / dry wipes (report 4_A28)
Customization Capability (Formulation and Process Tailored by Substrate and Performance)
This series is not sold as fixed models; instead, based on five third-party-validated formulations, we customize the anti-static solution to the customer's actual substrate and process metrics:
· Select by substrate: TAC polarizer / TAC optical compensation film → A28-12; polarizer protective film, release film → N6 top coat; PMMA / PC / PVC plastics (except PP, PE) → H16; optical-film / protective-film primer → A28; glass / touch-panel cover → H19.
· Customize by target surface resistance: from highly conductive 10³ Ω/sq (A28-12 neat) to regular anti-static 10¹⁰ Ω/sq (N6 1:6 dilution), flexibly tuned by dilution ratio (1:1, 1:2, 1:3, 1:5, 1:6, 1:7, 1:8, 1:10) and coating weight — e.g. H16 neat is 1×10⁸, reaching 1×10⁹ at 1:7; A28 neat 6 μm wet film reaches 10⁴, stabilizing at 10⁶~10⁹ after 1:6~1:10 dilution.
· Select by transmittance requirement: highest light transmission for glass → H19 (92.4%~92.7%, bare glass 91.5%); plastic film → H16 (88.7%~89.8%); protective film → N6 (87.8%~88.9%).
· Match the line by drying / curing conditions: high-temperature short-time → N6 / A28 (120°C × 20 s), H16 (120°C × 30 s); low-temperature long-time → A28-12 (80°C × 10 min); glass without heating may choose H19 air-dry 5 days or 80°C × 3 min.
· Select by wipe resistance: clean lines needing repeated alcohol / dry wiping → N6, A28, H19 (all tested through 50 alcohol and 50 dry wipes).
· Application methods: wipe, spray, roll or wire-bar coating; dilute before use with pure water : isopropanol = 1:1 premix (H19 diluted with pure water), filter through a 200-mesh screen before coating.
Before customization, please provide: substrate type, target surface resistance, target transmittance, line drying temperature / time and wipe requirements. The final formulation and process are subject to on-site verification; specific custom models and parameters are TBD (determined by customer operating conditions).
Technical Specifications
Item | Parameter |
Product series | A28-12, N6, H16, A28, H19 (coatable anti-static liquid / anti-static coating agent) |
Appearance | A28-12: blue liquid; N6: TBD; H16: milky white liquid; A28: TBD; H19: colorless transparent to translucent liquid |
Main ingredients | A28-12: water-based resin, dispersant; N6: nano inorganic conductive particles; H16: water-based resin, dispersant; A28: polythiophene conductive polymer; H19: pure silicone resin, dispersant |
Solvent | Water (thinner: pure water : isopropanol = 1:1; H19 diluted with pure water) |
Surface resistivity range | 10³ ~ 10¹⁰ Ω/sq (by model and dilution ratio) |
Visible light transmittance | 87.8% ~ 92.7% (by model and substrate) |
Drying / curing conditions | A28-12: 80°C × 10 min; N6 / A28: 120°C × 20 s; H16: 120°C × 30 s; H19: 80°C × 3 min or air-dry 5 days |
Coating thickness | A28-12: 15 μm; N6 / A28: 6 μm; H16: 6 μm |
Wipe resistance | N6 / A28 / H19: stable resistivity after 50 alcohol wipes and 50 dry wipes |
Storage environment | 15°C ~ 35°C |
Shelf life | 3 months unopened under proper storage (H19: TBD) |
Packaging | Sample 100 g HDPE bottle; shipment 1 kg / 10 kg / 25 kg HDPE drum (N6: 20 kg; A28: 25 kg) |
Corresponding test report No. | A28-12, 5_N6, 5_H16, 4_A28, 4_H19 |
Note: Surface resistivity measured with a MODEL100 surface-resistance meter; visible light transmittance measured with an AL-618 instrument (wavelength 380~780 nm); specific coating process and parameters are subject to actual verification.
Technical data of the glass-specific anti-static liquid H19 — initial resistivity 1×10⁷, 1×10⁸ after 50 alcohol / dry wipes, transmittance 92.4%~92.7% (report 4_H19)
Applications
Polarizers and Display Panels
· Conductive / anti-static primer for TAC film and TAC optical compensation film (A28-12).
· Anti-static on the adhesive side of In-cell / On-cell IPS polarizers.
· Anti-static on the outer glass of monochrome LCDs (H19).
Optical Films and Protective Films
· Top-coat anti-static on polarizer protective film and release-film outer layer (N6).
· Primer anti-static on optical films and protective films, with a three-day working window reserved (A28).
· Anti-static for roll-to-roll transparent PET film (H16).
Plastic Parts and Plastic Products
· Anti-static on PMMA, PC, PVC and other plastic surfaces (H16; except PP, PE).
· Anti-static protective film and anti-static release film.
Glass and Touch Panels
· Anti-static on various glass, displays and touch-panel covers requiring ESD protection (H19).
· Anti-static layer between anti-fingerprint coating and glass.
FAQ
Q: Is the anti-static liquid one product or several? How do I choose?
A: The series has five models by substrate — choose A28-12 for TAC polarizer, N6 for the outer surface of protective / release film, H16 for ordinary plastic parts (except PP, PE), A28 for film / protective-film primer, and H19 for glass / touch-panel cover. All five have corresponding third-party reports (A28-12, 5_N6, 5_H16, 4_A28, 4_H19) and can be further customized to your operating conditions.
Q: How low can the surface resistivity go? Will it affect light transmission?
A: Depending on model and dilution, surface resistivity can be tuned across 10³~10¹⁰ Ω/sq. After film formation, visible light transmittance reaches 87.8%~92.7%, and most models actually exceed the bare substrate, so light transmission of optical films and display panels is unaffected.
Q: How should the coating be dried and cured after application?
A: Conditions differ by model: A28-12 at 80°C × 10 min; N6 and A28 at 120°C × 20 s; H16 at 120°C × 30 s; H19 can be heat-cured at 80°C × 3 min or air-dried at room temperature for 5 days. The thinner is uniformly a pure water : isopropanol = 1:1 premix (H19 diluted with pure water).
Q: Is the coating alcohol-wipe resistant?
A: Third-party tested, N6, A28 and H19 keep stable surface resistivity (approx. 1×10⁸ Ω/sq) after 50 alcohol wipes and 50 dry wipes, suiting display-panel and glass-cover lines needing repeated cleaning. Note: higher dilution reduces wipe resistance — verify before use.
Q: Can you customize to our substrate and resistivity requirements?
A: Yes. Please provide the substrate type, target surface resistance, target transmittance, line drying temperature / time and wipe requirements; we adjust dilution ratio, coating weight and application method (wipe / spray / roll / wire-bar) based on the five validated formulations. The custom model and final parameters are subject to on-site verification.
Get a Quote / Contact Us
Shenzhen Qianhai Yuzhuo (Apex) — Anti-static Coating Agents
WeChat: qhyz1303
Tel: +86-755-26609876
Email: qhyz@apexe.net
Web: http://www.apexe.net/