Affiliation: Shenzhen Qianhai Yuzhuo (Apex) — Authorized Distributor of Mitsubishi Chemical
Meta description: Mitsubishi Chemical BeLight™ ultra-low transmission-loss thermoplastic film — Df<0.001@28GHz, water absorption <0.1%, copper peel strength >20 N/10 mm, UV-laser processable, heat resistance up to 260°C, VTM-0 flame retardancy. Designed for high-frequency high-speed circuit substrates, core materials, and flexible flat cable (FFC), with transmission loss comparable to fluoropolymers.
Models: BeLight™ SNL, ST, SDL, TT, U, UD types

BeLight™ ultra-low transmission-loss thermoplastic film product overview
Core Value
BeLight™ — ultra-low transmission-loss film with high copper-foil adhesion, directly targeting high-frequency signal attenuation
· Ultra-low dielectric loss: Df < 0.001 @28 GHz, transmission loss comparable to fluoropolymer (PTFE).
· Low water absorption: <0.1%, stable high-frequency electrical performance.
· High copper-foil adhesion: Peel strength to copper foil >20 N/10 mm (SNL/ST types), overcoming the weak adhesion of fluoropolymers/COP.
· UV-laser processable: Supports UV laser patterning for easier circuit formation.
· Rich model lineup: SNL (laser-processable + VTM-0 flame retardant), ST (transparent + weatherable), U/UD (low CTE, heat-resistant), and more.
· Dual FFC use: Can serve as both FFC adhesive and substrate, lowering the dielectric constant of the insulation.
Product Description
BeLight™ is an ultra-low transmission-loss thermoplastic film from Mitsubishi Chemical, targeting high-frequency high-speed circuit substrates and flexible flat cable (FFC). It achieves ultra-low dielectric loss on par with fluoropolymers while solving the weaknesses of fluorinated materials — low copper-foil adhesion, inability to laser-process, and low elongation at break.
1. Working Principle & Technical Breakthrough
When high-frequency signals transmit through an insulating material, dielectric constant Dk and dielectric loss Df directly determine signal attenuation. Through materials design, BeLight™ brings Df down to the 0.0003–0.0005 @28 GHz range, with 40 GHz transmission loss on par with LCP and PTFE; surface/formulation design simultaneously delivers high copper-foil adhesion (>20 N/10 mm) and UV-laser processability.
2. Performance & Precision Parameters
· Dielectric: Dk 2.2 @28 GHz (SNL/ST/SDL/TT/U types), Df 0.0003–0.0015 (by grade).
· Copper-foil peel strength: SNL/ST >20 N/10 mm; U-type 8.4, UD-type 6.4 N/10 mm.
· Heat resistance: TT/UD types DMA heat resistance 260°C.
· Flame retardancy: SNL type VTM-0.
· Transparency / weatherability: ST type total transmittance 93%, haze 1%.
· Target thickness: 100, 75, 50, 25 μm; roll width <1300 mm.
BeLight™ development model performance comparison table
3. Materials & Product Applicability
U-type (no inorganic filler): melting point 271°C, Tg 112°C, CTE 90 ppm/°C, Dk 2.4, Df 0.0004, water absorption <0.1%, tensile elongation 50%; UD-type (glass-fabric-reinforced): CTE 14 ppm/°C, Dk 2.9, Df 0.0015, tensile elongation 7%. Target applications include circuit substrates and core materials.
4. Core Value & Application Benefits
In FFC, BeLight™ can serve as both adhesive (S-type, hot-melt) and substrate (U-type, PET, etc.), suppressing high-frequency signal attenuation by lowering the dielectric constant of the insulation (adhesive + substrate). Board traces can also be replaced by FFC, reducing low-Dk substrate usage and increasing design freedom.
BeLight™ application example: flexible flat cable (FFC)
BeLight™ expected FFC scenarios: high-speed transmission and loss reduction
Key Advantages
(I) Fluoropolymer-Level Low Loss + High Copper-Foil Adhesion
BeLight™ offers 40 GHz transmission loss on par with LCP and PTFE while overcoming fluoropolymer/COP weaknesses — low copper-foil adhesion (<3 N/10 mm), inability to laser-process, and low elongation. Copper-foil adhesion reaches >20 N/10 mm, and UV-laser processing is supported, making high-frequency circuits and FFC easier to fabricate.
(II) Model Matrix Covers Diverse Requirements
Model | Features | Heat resistance °C (DMA) | Dk @28G | Df @28G | Copper peel N/10mm |
SNL | Laser-processable + flame retardant | 150 | 2.2 | 0.0004 | >20 |
ST | Transparent + weatherable | 150 | 2.2 | 0.0003 | >20 |
SDL | Laser-processable | 150 | 2.8 | 0.0005 | >10 |
TT | Transparent + reflow-resistant | 220 | 2.2 | 0.0006 | 8 |
U | Reflow-resistant + low CTE | 260 | 2.4 | 0.0004 | >10 |
UD | Reflow-resistant + low CTE + heat-resistant | 260 | 2.9 | 0.0015 | >10 |
Note: Values are representative measured examples, not guaranteed values.
(III) Dual FFC Use, Lowering Insulation Loss
Using BeLight™ as both FFC adhesive and substrate significantly reduces transmission loss at equal length compared with ordinary FFC (PET substrate + polyester adhesive), supporting high-frequency high-speed transmission.
Technical Specifications
Item | Parameter |
Product type | Ultra-low transmission-loss thermoplastic film |
Models | SNL, ST, SDL, TT, U, UD types |
Target thickness | 100, 75, 50, 25 μm |
Roll width | <1300 mm |
Dielectric constant Dk (28 GHz) | 2.2 (SNL/ST/SDL/TT/U); 2.4 (U-type measured); 2.9 (UD-type) |
Dielectric loss Df (28 GHz) | 0.0003–0.0015 (by grade) |
Water absorption | <0.1% |
Copper-foil peel strength | >20 N/10 mm (SNL/ST); U-type 8.4, UD-type 6.4 N/10 mm |
Heat resistance | Up to 260°C (TT/UD types, DMA) |
Flame retardancy | VTM-0 (SNL type) |
Transparency / weatherability | ST type total transmittance 93% / haze 1% |
Laser processing | YAG, 360 nm processable (SNL/SDL types) |
Note: The above data are representative measured values from Mitsubishi Chemical product literature and are not guaranteed values.
Applications
High-Frequency Communications & High-Speed Circuits
· 5G / high-frequency high-speed circuit substrates and core materials.
· High-frequency copper-clad laminate substrates with high copper-foil adhesion.
Flexible Flat Cable (FFC)
· FFC adhesive and substrate, lowering the dielectric constant of the insulation.
· High-speed FFC jumpers, replacing partial board traces.
Others
· Electronic insulation and thermal-lamination applications requiring low dielectric constant.
· High-frequency components requiring VTM-0 flame retardancy or transparent weatherability.
FAQ
Q: What dielectric performance level does BeLight™ offer?
A: BeLight™ dielectric loss Df can be as low as 0.0003–0.0004 @28 GHz, with 40 GHz transmission loss on par with fluoropolymers such as LCP and PTFE — an ultra-low transmission-loss thermoplastic film.
Q: What practical advantages does BeLight™ offer over PTFE/LCP?
A: While maintaining low loss, it offers high copper-foil adhesion (>20 N/10 mm, vs fluoropolymer/COP typically <3 N/10 mm), UV-laser processability, and high elongation, making high-frequency circuits and FFC easier to fabricate.
Q: How is BeLight™ used in FFC?
A: It can serve as both FFC adhesive (e.g., S-type, hot-melt) and substrate (e.g., U-type), lowering the dielectric constant and loss of the insulation (adhesive + substrate) to reduce high-frequency transmission loss.
Q: Which models are available and how do I select?
A: SNL (laser-processable + VTM-0), ST (transparent + weatherable), SDL (laser-processable), TT (reflow-resistant 220°C), U/UD (reflow-resistant 260°C, low CTE; UD includes glass fabric). Select by heat resistance, flame retardancy, transparency, and CTE requirements.
Q: What are the thickness and width specs?
A: Target thickness 100/75/50/25 μm, roll width <1300 mm; please refer to the formal specification sheet for details.
Apex) — Authorized Distributor of Mitsubishi Chemical
WeChat: qhyz1303 / Tel: +86-755-26609876 / Email: qhyz@apexe.net / Web: http://www.apexe.net/