Product Section
Product MITSUBISHI CHEMICAL GROUP Superio UT Ultra-Engineering Plastic Film | PEI/PEEK High-Temperature Tape Substrate for Semiconductor Packaging
PILLAR
Conductive Anti-Static Sleeve CTC | Static Shielding for PFA Tubing — Visible, Easy to Install, Spark-Preventing Ultra-High-Purity PFA Tubing, Bellows Pumps & Valves | Super 300 Fittings for Low-Pulsation Chemical Delivery Porous Carbon Vacuum Chuck NCC/PCP | Ceramic-Chuck Alternative — Lighter, Particle-Free, Anti-Static Porous Carbon Vacuum Chuck NCC/PCP | Ceramic-Chuck Alternative — Lighter, Particle-Free, Anti-Static
MITSUBISHI CHEMICAL GROUP
Superio UT Ultra-Engineering Plastic Film | PEI/PEEK High-Temperature Tape Substrate for Semiconductor Packaging MOSMITE™ Moth-Eye Anti-Reflection Film & PVA Polarizer | 0.2% Ultra-Low Reflection for Automotive Displays Art-Ply® CF Special Soft Lamination Film | Adhesive-Free CFRP Impact & Vibration Damping Interlayer DPF Flexible PVC/PO Functional Films | Mitsubishi Chemical 100%-Owned Subsidiary for Auto, Building & Semiconductor Tapes BeLight™ Ultra-Low Transmission-Loss Thermoplastic Film | Df<0.001@28GHz for High-Frequency PCBs and FFC Mitsubishi Chemical of Japan
Optical accuracy testing equipment
Cover glass inspection equipment Flow cytometry microarray analyzer Film thickness measurement equipment 720° Probe AOI Inspection Equipment — Comprehensive, High-Efficiency Full Inspection for Pins, Probes, and Terminals Qiuhao R Series Laser Interferometric 3D Surface Profiler — 1-Second Full Inspection for Wafers, Microlenses, and Glass V-Grooves
Anti-static Coating Agents
Anti-static Coating Agents (Anti-static Liquids) | Water-based Custom ESD Coatings for TAC Polarizer, Protective Film, Plastic, Film Primer and Glass

Affiliation: Shenzhen Qianhai Yuzhuo (Apex) — Authorized Distributor of Mitsubishi Chemical

Meta description: Mitsubishi Chemical Superio UT ultra-engineering plastic films — mass-produced PEI (E/F/NB types) and PEEK (KN type) films, with developed PPSU (A/X-1) and SPS (S type). Heat resistance up to 340°C Tm, alkali resistance, low water absorption, custom thickness down to 7 μm for semiconductor process tape substrates, compression-molding release films, HV/EV motor insulation, and speaker diaphragms.

Models: Superio UT E-type, F-type, NB-type (PEI); KN-type (PEEK); A-type/X-1-type (PPSU); S-type (SPS)


Superio UT 超级工程塑料薄膜 (3).png 

Superio UT ultra-engineering plastic film product lineup


Core Value

Superio UT ultra-engineering plastic films — the best balance among heat-resistant films, achieved with proprietary film processing technology

· Mass-produced PEI/PEEK: Using Mitsubishi Chemical's proprietary film processing technology, we mass-produce both PEI and PEEK super-engineering plastic films.

· High heat & chemical resistance: PEI Tg ~220°C, PEEK Tm ~340°C; alkali and chemical resistant, suited to semiconductor back-end processes.

· Low water absorption & secondary formability: Low moisture uptake (PEI ~1.0%, PEEK ~0.5%); thermoformable; customizable thickness.

· Alternative to traditional PI film: Compared with PI film, PEI/PEEK offers superior alkali resistance, UV transmittance, and more flexible thickness options.

· Developed grades expand reach: PPSU (A/X-1 type) is hydrolysis-resistant and UV-transparent; SPS (S type) offers high release, high conformability, and PFAS-free composition for compression-molding release films.

· Multi-sector extension: Speaker diaphragms, heat-resistant label tapes, HV/EV motor insulation, CFRTP matrix, hydrogen-energy components.


Product Description

Superio UT is a brand of ultra-engineering plastic films made by Mitsubishi Chemical using proprietary film processing technology. It currently mass-produces PEI and PEEK films and provides small-batch samples of newly developed materials via lab-scale equipment. The product targets semiconductor process materials and extends into electronics, audio, automotive, and hydrogen-energy fields.

1. Working Principle & Technical Breakthrough

Ultra-engineering plastics (PEI/PEEK, etc.) intrinsically offer high heat and chemical resistance, but the key technical challenge is forming them into films. Mitsubishi Chemical uses proprietary film-forming technology to cast PEI, PEEK, and other resins into continuous films, and has optimized the balance across five dimensions — heat resistance, dimensional stability, water absorption, chemical resistance, and tensile elongation — among PEI/PEEK/PPS/PI/PEN films. Among heat-resistant films, PEI and PEEK deliver the best performance balance.

2. Performance & Precision Parameters

· Mass-produced grades & thickness: PEI E-type (natural, 15–250 μm), F-type (natural, 7–350 μm), NB-type (black, 38–250 μm); PEEK KN-type (natural, 35–300 μm).

· Heat resistance: PEI Tg ~220°C, PEEK Tm ~340°C.

· Alkali resistance: tensile-strength retention after 10 wt% NaOH immersion — F-type PEI 94%, KN-type PEEK 100% (PI: 0%, dissolved).

· UV transmission: 50 μm @400 nm transmittance — F-type PEI 28%, KN-type PEEK 34% (PI: 0%).

· Water absorption: F-type PEI ~1.0%, KN-type PEEK ~0.5% (PI ~2.3%).


Superio UT 超级工程塑料薄膜 (4).png 

Superio UT radar comparison of film properties


3. Materials & Product Applicability

· Semiconductor process tape substrate: F-type (PEI) and KN-type (PEEK) — high heat resistance (PEI Tg 220°C, PEEK Tm 340°C) and chemical resistance (alkali resistance, etc.).

· Compression-molding release film: S-type (SPS) — high heat resistance (Tm 270°C), high release, high conformability, PFAS-free.

· PPSU film: A-type (under development, Tg 220°C, UV-transparent, hydrolysis-resistant) — for fuel-cell/water-electrolysis sub-gasket substrates, automotive speaker diaphragms, heat-resistant tapes.

4. Core Value & Application Benefits

Selection key: secondary-processable, low water absorption, excellent chemical resistance, fine thickness control. F-type PEI covers 7–350 μm with MOQ from 1 roll; KN-type PEEK covers 35–300 μm — flexibly matching different processes.


Superio UT 超级工程塑料薄膜 (1).png 

Superio UT selection comparison vs PI film

Superio UT 超级工程塑料薄膜 (2).png 

Superio UT physical properties table across film types


Key Advantages

(I) Superio UT vs PI Film: Alkali Resistance, UV Transparency, Secondary Thermoforming

Item

PI Resin

F-type (PEI)

KN-type (PEEK)

Heat resistance Tg/Tm

>380°C

221°C

338°C

Heat dimensional change (200°C × 2 h)

MD −0.2%

MD −0.3%

MD −0.2%

Water absorption

2.3%

1.0%

0.5%

Alkali resistance (strength retention after 10 wt% NaOH)

0% (dissolved)

94%

100%

UV transmittance (50 μm @400 nm)

0%

28%

34%

Secondary thermoforming

Not possible

Possible

Possible

Thickness range

12.5–125 μm (mass volume)

7–350 μm (from 1 roll)

35–300 μm

Note: Values are representative measured examples, not guaranteed values.

(II) SPS S-type Release Film: High Conformability, High Release, PFAS-Free

The S-type (cross-linked polystyrene) non-stretched film offers excellent tensile elongation at high temperatures with minimal elastic-modulus change; even when mold temperature is uneven, it follows the mold with excellent conformability. It has been confirmed to release fully from sealing materials and, although matte in appearance, offers excellent release performance. Compared with fluorinated films (ETFE/PTFE), SPS is PFAS-free, offers better heat dimensional stability and step-conformability, and is more cost-effective.

(III) Wide Thickness Customization & Flexible Small-Batch Supply

F-type PEI 7–350 μm from 1 roll; KN-type PEEK 35–300 μm; PPSU A-type 25–200 μm and X-1-type 5–200 μm; surface options include single-side matte / glossy / high-smoothness.


Technical Specifications

Item

Parameter

Mass-produced materials/grades

PEI: E-type 15–250 μm, F-type 7–350 μm, NB-type 38–250 μm; PEEK: KN-type 35–300 μm

Developed materials/grades

PPSU: A-type 25–200 μm, X-1-type 5–200 μm; SPS: S-type 30–250 μm

PEI heat resistance (Tg)

~220°C

PEEK heat resistance (Tm)

~340°C

PPSU heat resistance (Tg)

~220°C

SPS heat resistance (Tm)

~270°C

PEI / PEEK water absorption

~1.0% / ~0.5%

Alkali resistance (tensile retention after 10 wt% NaOH)

PEI 94% / PEEK 100%

UV transmittance (50 μm @400 nm)

PEI 28% / PEEK 34%

Main applications

Semiconductor process tape substrates, compression-molding release films, speaker diaphragms, heat-resistant label tapes, HV/EV motor insulation, CFRTP matrix

Note: The above data are representative measured values from Mitsubishi Chemical product literature and are not guaranteed values.

Applications

Semiconductor & Advanced Packaging

· Semiconductor process tape substrates: F-type PEI and KN-type PEEK, reflow- and chemical-resistant.

· Compression-molding release films: S-type SPS, high release, high conformability, PFAS-free.

· Heat-resistant, chemical-resistant release and protection for wafer/board processes.

Electronics & New Energy

· HV/EV motor and special insulation parts: PEI/PEEK films.

· Fuel-cell and water-electrolysis sub-gasket substrates: PPSU A-type.

· Heat-resistant tapes (UV-curable adhesives, etc.): PPSU.

· Semiconductor tape substrates.

Audio & Industrial

· Smartphone and automotive speaker diaphragms: PEI/PPSU.

· Heat-resistant labels, tapes; CFRTP matrix materials.

· VR headsets, 3D printers, aircraft components (CFRTP).


FAQ

Q: What advantages does Superio UT offer over traditional PI film? 

A: While maintaining high heat resistance, PEI/PEEK has lower water absorption (~1.0%/0.5% vs PI ~2.3%), excellent alkali resistance (94–100% strength retention after 10 wt% NaOH immersion; PI dissolves), UV transmittance, and secondary thermoformability, with thickness customizable down to the 7 μm range.


Q: Which grade is recommended for semiconductor process tape substrates? 

A: F-type (PEI) and KN-type (PEEK) are recommended — high heat resistance (PEI Tg 220°C, PEEK Tm 340°C) and chemical resistance (alkali resistance). For compression-molding release films, S-type (SPS) is recommended — high release, high conformability, PFAS-free.


Q: Can thickness be customized? What are MOQs? 

A: F-type PEI 7–350 μm from 1 roll; KN-type PEEK 35–300 μm (MOQ please inquire); PPSU A-type 25–200 μm and X-1-type 5–200 μm.


Q: How does SPS release film differ from fluorinated films (ETFE/PTFE)? 

A: SPS is PFAS-free, offers better heat dimensional stability and step-conformability, and is more cost-effective. At high temperatures its elastic modulus changes little and conformability is good; after release, the sealing material surface retains a matte finish matching the film.


Q: Besides semiconductors, what other fields can it serve? 

A: Speaker diaphragms, heat-resistant labels/tapes, HV/EV motor insulation, CFRTP matrix materials, fuel-cell/water-electrolysis sub-gaskets (PPSU), and hydrogen-energy components.




Shenzhen Qianhai Yuzhuo (Apex) — Authorized Distributor of Mitsubishi Chemical

WeChat: qhyz1303 / Tel: +86-755-26609876 / Email: qhyz@apexe.net / Web: http://www.apexe.net/


Share
MOSMITE™ Moth-Eye Anti-Reflection Film & PVA Polarizer | 0.2% Ultra-Low Reflection for Automotive Displays
BeLight™ Ultra-Low Transmission-Loss Thermoplastic Film | Df<0.001@28GHz for High-Frequency PCBs and FFC
Top